Setting The Standby Mode - Fujitsu N7100 Operator's Manual

4.6.3 Setting the Standby Mode

You can set the transition time for automatic logout, the standby mode, and power-off.
 For any window after regular user login, if no operations are performed for the
specified period of time for [Logout after], the scanner automatically logs the user
out.
HINT
 The scanner does not logout while the following operations are ongoing:
 When automatic login is enabled, the main menu window appears (the job menu
 The time that is selected in [Logout after] never becomes invalid whether you enable
 [Standby Mode] is a function that automatically switches the scanner to standby
mode if no operations are performed for a specified period of time on the [Login]
window or any other window after a regular user logs in.
By using the [Turn off the display only] setting, standby mode can be changed.
When the power button is pressed, the scanners start up from standby mode.
The window displayed after restarting varies according to the automatic login
settings in the following way:
 If automatic login is enabled, the operation window is displayed.
 If automatic login is disabled, the [Login] window is displayed.
For details about window transitions, refer to
When setting the time for [Standby after], the time until the scanner logs the user
out must also be included.
 If no operations are performed for the specified period of time for [Power-off after]
when the scanner power is left on, the scanner power is automatically turned off.
The scanner enters standby mode first. If no further operations are performed in
standby mode, the scanner power is automatically turned off.
When setting the time for [Power-off after], the time until the scanner enters
standby mode must also be included.
 Scanning documents
 e-Mailing a scan
 Faxing a scan
 Printing a scan
 Saving a scan
 Automatic login is enabled
window appears if the job menu is selected for the initial post-login menu in the job
groups tab) when the logout wait time has been exceeded.
the automatic login or not.
4.6 Configuring the Login-Related Settings
Touch Central Admin
Console
Panel
"Using the Power Button" (page
97
53).