Glossary - Fujitsu N7100 Operator's Manual

Glossary

ADF (Automatic Document Feeder)
A unit that allows the user to scan a number of pages consecutively.
Documents are transported from the ADF paper chute past the scanning area to
the stacker. Actual scanning is performed by the CCD sensors inside of this unit.
Brake roller
A roller that prevents more than one sheet of documents to be fed into the ADF at
once.
Brightness
The brightness level of a scanned image.
Carrier Sheet
A Carrier Sheet is a plastic sheet specifically used for loading non-standard
documents onto the scanner.
Document Sensor
Paper feeding errors such as multifeed and paper jam are detected by monitoring
the passing of documents.
Duplex scan mode
A scan mode where both sides of each document sheet are scanned. See also
"Simplex scan mode".
Eject roller
Rollers that feed documents in the ADF to the stacker.
Feed roller
Rollers that feed documents through the ADF.
Gamma
A unit which indicates the changes in the brightness of an image. t is expressed
as a function of the electric input power to devices (e.g. scanner, display) and the
brightness of the image. If the gamma rate is larger than 1, the brightness of an
image increases and vice versa. Normally, the gamma rate is set to 1 when
reproducing the same brightness as the original.
471