Setting The Network Printers - Fujitsu N7100 Operator's Manual

4.14 Setting the Network Printers

Set a printer connected to the network as a network printer.
You can set a network printer in one of the following ways:
(a) Setting a network printer via a print server
(b) Setting a network printer without a print server
(a) Setting a Network Printer via a Print Server
Set a network printer via print server. The setting procedure is as follows:
1. Check the printer driver.
For details, refer to
2. Set the printer properties.
For details, refer to
3. Register the network printer.
Up to 100 network printers can be registered.
A network printer can be registered in the following ways.
 Network Tree
Select a network printer from the network tree.
For details, refer to
Server)" (page
 Network Path
Directly enter the network printer path name.
For details, refer to
For
ATTENTION
 Read the printer manual beforehand for information about setting a printer, adding a network
printer, and other cautions.
 Make sure that there is enough space in the drive before printing.
 Do not set a virtual printer.
 If a printer connected to different print servers is to be registered as a network printer multiple
times, the software version of the driver should be the same on each print server.
If the software version of the printer driver differs, printing errors may occur.
 If the shared name of the printer contains the vertical bar (|), it cannot be registered as a
network printer.
"Checking the Printer Drivers" (page
"Setting the Printer Properties (via the Print Server)" (page
"Registering a Network Printer (Network Tree) (via the Print
154).
"Registering a Network Printer (Network Path)" (page
Step 4, refer to (a).

4.14 Setting the Network Printers

Touch
Panel
147
Central Admin
Console
150).
151).
156).