Fujitsu N7100 Operator's Manual page 75

1. Start the Admin Tool.
 Windows Vista/Windows 7/Windows Server 2008/Windows Server 2008 R2
Select the [Start] menu  [All Programs]  [Network Scanner]  [Network
Scanner Admin Tool].
 Windows 8/Windows Server 2012
Right-click the Start screen, and select [All apps] on the app bar  [Network
Scanner Admin Tool] under [Network Scanner].
 Windows 8.1/Windows Server 2012 R2
Select [↓] on the lower left of the Start screen, and click [Network Scanner Admin
Tool] under [Network Scanner].
To display [↓], move the mouse cursor.
 Windows 10
Select [Start] menu  [All apps]  [Network Scanner]  [Network Scanner Admin
Tool].
 The Admin Tool is started.
2. Specify the [Connect to] (of the scanner).
Enter the IP address, scanner name, or FQDN for the scanner to be setup or
managed.
ATTENTION
 If the port number was changed in
enter the changed port number in [Port Number].
 When trying to connect with a port number other than the specified number, it takes up
to 20 seconds before a connection error occurs.
 To use SSL, select the [Use HTTPS] check box.
 If the Admin Tool is started while there is insufficient free memory, an error may occur.
Try again after ensuring that there is enough free memory.
"4.9.1 Setting the Admin Connection" (page
75
4.2 Administrator Login
111),