Fujitsu N7100 Operator's Manual page 81

3. Press the [OK] button.
 The restart confirmation window appears.
HINT
In the following cases, the authentication window appears.
 When specifying the scanner as a domain member
 When changing the name of a scanner that is a member of a domain
Check the authentication information required for specifying the scanner as a domain
member with the network administrator, and enter the valid user name and password.
User names may be up to 256 characters long.
Passwords may be up to 256 characters long. [User Name] and [Password] are case
sensitive.
If the user name and password are valid, the restart confirmation window appears.
4. Press the [Now] button.
 The scanner is restarted.
HINT
The connection with the scanner is lost if the scanner name is changed via the Admin Tool.
To continue with other settings, wait a short time for the scanner to restart, then access the
scanner via the Admin Tool again.
81
4.4 Configuring the System