Installing The Admin Tool - Fujitsu N7100 Operator's Manual

3.3

Installing the Admin Tool

To download and install the Admin Tool on a computer, follow the procedure below.
1. Access the scanner from Internet Explorer by using the scanner name in
a URL to show the download window.
For details about how to display the download window, refer to
Software Download Window" (page
2. Press the [Next] button for [Network Scanner Admin Tool].
 The Admin Tool download window appears.
3. Press the [Download] button.
ATTENTION
 Downloading is not possible while a scanner operation is in process.
 Do not close Internet Explorer or log out until the installation is complete.
 Installation fails if the length of any installation path (folder path plus installation file
name) exceeds 259 characters. Select an installation folder that respects this limit.
HINT
If .NET Framework is not installed, access the Microsoft Web site before installing
Admin Tool.
After installing .NET Framework, try again from
 From here on after, follow the instructions on the window to proceed the
operation.
When "Network Scanner Admin Tool has been successfully installed" is
displayed, the installation is complete. Press the [Close] button.
 After the installation is complete, log out from the scanner by pressing the
[Logout] button on the download window and close Internet Explorer.
 After installation, Admin Tool can be started.
For details about how to start Admin Tool, refer to
the Admin Tool" (page
62).
Step
74).
64

3.3 Installing the Admin Tool

"3.2 Showing the
1.
"4.2.2 Administrator Login: via