Failure To Connect To A Server Using Its Host Name Or Fqdn; Failure To Add The Scanner As A Domain Member, Or Failure To Login To A Domain - Fujitsu N7100 Operator's Manual

■ Failure to Connect to a Server Using Its Host Name or FQDN

If a server cannot be connected to by using its host name or FQDN, and does not respond
to a ping test, try the following steps:
Same as in "Failure to Connect to a Server Using Its IP Address"
■ Action
Check if a network connection is possible by trying the same solution for
Server Using Its IP Address"
The scanner's DNS server or WINS server settings are invalid.
■ Action
Check that the DNS and WINS server settings are correct.
The DNS server or WINS server is not functioning normally, or there is
an error with the DNS or WINS server network connection.
■ Action
Ping the DNS and WINS servers to check they are functioning normally.
If the DNS or WINS server is not functioning, request the network administrator to check its
status.
■ Failure to Add the Scanner as a Domain Member, or Failure to
Login to a Domain
When the scanner is specified as a domain member, an authorization
error occurs and the scanner cannot be added.
■ Action
 When specifying the scanner as a domain member, perform authentication as a user with
domain administrator rights, or as a user with the rights to add a computer to the domain.
If you do not know the user name or the password, contact the system administrator of the
domain.
 Check that the LAN Manager authentication level is set to the same level as the server in the
domain.
After a user with administrator rights registers a scanner to a domain,
authentication is attempted by a domain user without administrator
rights in order to change the scanner name, but login fails.
■ Action
When registering a scanner to a domain with administrator rights, be sure to perform
authentication as a user with administrator rights again the next time.
7.2 Network Connection Troubleshooting
(P.376).
378
(P.376).
"Failure to Connect to a