Fujitsu N7100 Operator's Manual page 228

 For users registered in a local account
Specify a user name from the user information of the local account.
Authentication is performed with a specified user login name for a local account saved
in a scanner.
Note that the authenticated user information is also used when saving scans to a network
folder.
When the scanner is turned on or restarted, automatic login without displaying the [Login]
window is possible.
Login is not possible if the Active Directory account option is "User must change
password at next logon". Contact an administrator to change a password, and then try
logging in.
HINT
 When using a scanner without using an LDAP server or registering a local account, enter the
following user name and password. For details about the LDAP server, refer to
Server" (page 45).
User name: guest
Password: guest
However, this cannot be used if login with the guest account is disabled.
 For details about automatic login or enabling login with the guest account, refer to
Setting the Login Settings" (page
 Only one administrator or regular user can log in to the scanner at a time. Multiple persons
cannot log in at the same time.
 When [Other LDAP Server] is selected for [Server Type], you cannot skip entering a
password in the [Login] window. Always enter the password.
1. Press the power button.
 The [Login] window appears.
5.3 Logging in: Regular User Mode
92).
Power button
228
"LDAP
"4.6.1