Changing The Settings After Connecting To Scansnap - Fujitsu iX100 Connection Manual

Changing the settings after connecting
to ScanSnap
The following settings can be configured with ScanSnap Wireless Setup Tool after ScanSnap is
connected to the computer/mobile device. The ScanSnap Wireless Setup Tool is included in ScanSnap
Manager.

To set the wireless mode fixed to Access Point Connect mode or Direct Connect mode

To use a different computer for Wi-Fi connection

To use a different wireless access point to connect to the ScanSnap

To change the password to connect to the ScanSnap
Please refer to below for details.
How to configure the settings after ScanSnap is connected
How to configure the settings after ScanSnap is connected
12