Scanned Data Is Inappropriate - Fujitsu N7100 Operator's Manual

When scanning with a Carrier Sheet, the [Paper jam has occurred.
Remove the documents from the ADF and try again.] message appears
and an error occurs.
■ Check item
When an error occurs while scanning with a Carrier Sheet, after the [Scanning with the carrier
sheet failed. Make sure the document is fully inserted into the top of the carrier sheet and the
folded edge is on the side marked with the thick line, then try again.] message appears, the
[Paper jam has occurred. Remove the documents from the ADF and try again.] message
appears, and scanning fails.
■ Action
Follow the instructions in the messages, and try again.

■ Scanned Data Is Inappropriate

Scanned data is elongated.
■ Check item
Are the feed rollers dirty?
■ Action
Clean the feed rollers.
For more details, refer to
Shadow on the leading edge of the scanned data.
■ Check item
Are the feed rollers dirty?
■ Action
Clean the feed rollers.
For more details, refer to
Vertical line on the scanned data.
■ Check item
Is the glass dirty?
■ Action
Follow the steps in
"6.3 Cleaning Inside the Scanner"
"6.3 Cleaning Inside the Scanner"
"Chapter 6 Scanner Care" (P.341)
390
7.3 Other Troubleshooting
(P.345).
(P.345).
to clean the glass.