Cloning A Job Sequence; Editing A Job Sequence - Fujitsu N7100 Operator's Manual

■ Cloning a Job Sequence

This section describes how to clone a job sequence.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
 The [Jobs List] window appears.
3. Select the job sequence to be cloned.
4. Press the [Clone] button.
 The [Job Details] window appears.
5. Clone the detailed job sequence settings.
6. Press the [OK] button.
 A job sequence is added to the [Jobs List] window.

■ Editing a Job Sequence

This section describes how to edit a job sequence.
1. Press the [Job Menu Settings] button on the Tool Menu.
2. Press the [Job Sequences] tab.
 The [Jobs List] window appears.
3. Select the job sequence to be edited.
4. Press the [Edit] button.
 The [Job Details] window appears.
5. Edit the detailed job sequence settings.
6. Press the [OK] button.
 The settings of the job sequence are changed.
4.18 Setting a Job Sequence
198