Installation Specifications; D.1 Installation Specifications - Fujitsu N7100 Operator's Manual

D.1 Installation Specifications

Dimensions (W × D × H)
Weight
LCD
Touch panel
Keyboard
Interface
Input power
Power
consumption
(AC)
Operating
environment
Heating value
(*): For details about the labels, refer to
397).
HINT
The scanner is equipped with a LAN card that supports Wake On LAN. The power is not
turned on automatically by the Wake On LAN function after the power goes off abnormally,
such as in the event of a blackout.
Item
Network
USB
Voltage
Frequency
Operating
Energy-saving
mode
Power off
Temperature
Humidity
Operating
Energy-saving
mode
Power off
Specification
300 × 232 × 172 mm (11.81 × 9.14 × 6.77 in.)
(This does not include the ADF paper chute or
other parts that stick out)
6.0 kg
8.4-in. XGA TFT LCD monitor
Analog resistive touch panel
On-screen keyboard
LAN (1000BASE-T/100BASE-TX/10BASE-T) ×1
USB 2.0 ×2 (For keyboard and mouse)
100 to 240 V ±10%
50/60 Hz
38 W or less
Power consumption value is different depending on
the "PART NO." that is printed on the label (*).
PA03706-Bxx1/Bxx3: 2.0 W or less
PA03706-Bxx5: 8.8 W or less
0.5 W or less
Operating: 5 to 35 °C, Non-operating: -20 to 60 °C
Operating: 20 to 80%, Non-operating: 8 to 95%
33 Kcal/Hr or less
Heating value is different depending on the "PART
NO." that is printed on the label (*).
PA03706-Bxx1/Bxx3: 1.72 Kcal/Hr or less
PA03706-Bxx5: 7.57 Kcal/Hr or less
0.43 Kcal/Hr or less
"7.5 Checking the Scanner Labels" (page
420
D.1 Installation Specifications