Configuring Network Advanced Settings - Fujitsu N7100 Operator's Manual

4.7.7 Configuring Network Advanced Settings

Set the Link Speed/Duplex Mode and Wake On LAN.
Also set whether or not to use the IPv6 function. For details about the IPv6 function, refer
to "Appendix G IPv6 Settings" (page
1. Select [Network Advanced Settings] under [Network Settings].
 The [Network Advanced Settings] window appears.
2. Specify each item.
3. Press the [OK] button.
 The information entered is set.
HINT
The connection with the scanner is lost if the IPv6 function is changed via the Admin Tool. To
continue with other settings, close the Admin Tool and then access the scanner via the Admin
Tool again.
4.7 Configuring the Network Settings
456).
108
Touch
Panel