Fujitsu N7100 Operator's Manual page 89

2. Specify each item.
If [Middle] or [Top & Bottom] is selected, enter both "#1" (upper limit) and "#2" (lower
limit).
 Middle
Multifeeds will be detected in the shaded (a) area between "#1" (upper limit) and
"#2" (lower limit).
 Top & Bottom
Multifeeds will be detected from the top of the page to "#1" (upper limit), and from
"#2" (lower limit) to the bottom of the page. (b)
3. Press the [OK] button.
 The information entered is set.
Up to 510 mm
Outside of multifeed
detection area
25 mm 25 mm
Up to 510 mm
Outside of multifeed
detection area
89
4.5 Setting the Scan Options
25 mm
#1
(a)
Center of paper
#1
(b)
#2
(b)
Center of paper
#2