Sending The Scanned Data By E-Mail - Fujitsu N7100 Operator's Manual

5.4

Sending the Scanned Data by e-Mail

ATTENTION
If an LDAP server is set, register the user e-mail address with the LDAP server. If a local
account is set, register the user e-mail address.
If the user e-mail address is not registered, e-mails cannot be sent.
1. On the [Main Menu] window, press the [e-Mail] button.
 The [Send e-Mail] window appears.
HINT
The scan information can be changed by pressing
refer to
2. Enter e-mail addresses, distribution list names, or groups in [To], [Cc],
and [Bcc] fields.
For more details about distribution list settings, refer to
Target to the e-Mail Address Book" (page
HINT
 e-Mail addresses can be selected from the e-mail address book by pressing
details, refer to
233).
If the e-mail address book cannot be used, contact the administrator.
 Groups can be edited using User Editor. Distribution lists can also be edited. For details,
refer to
"5.9 Setting the Scan Options" (page
"5.4.1 Selecting an e-Mail Target from the e-Mail Address Book" (page
"Appendix F Editing Using User Editor" (page

5.4 Sending the Scanned Data by e-Mail

of [Scan Settings]. For details,
271).
237).
433).
230
"5.4.2 Adding an e-Mail
. For