Fujitsu N7100 Operator's Manual page 148

(b) Setting a Network Printer without a Print Server
Set a network printer without a print server for direct printing.
ATTENTION
To install a printer driver on a scanner from a computer, you need to prepare a computer in
advance, on which a network printer has been published.
You can set a network printer without a print server in one of the following ways:
(b-1) Downloading a driver from a computer on which a network printer is published
and using the driver
(b-2) Registering a network printer and then selecting a driver for the network printer
The setting procedure is as follows:
(b-1) Downloading a Driver from a Computer on Which a Network
Printer Is Published and Using the Driver
1. Prepare a computer on which a printer is registered as a network printer.
2. Check the printer driver.
For details, refer to
3. Check the printer name or the IP address for the printer.
For details, refer to
Direct Printing)" (page
4. Register a network printer without a print server.
Directly enter each item of the settings for network printers.
Up to 100 network printers can be registered.
For details, refer to
Step 4, refer to (b-1).
ATTENTION
 To register a network printer without a print server, the printer that you intend to register
needs to be turned on.
 When you register a network printer without a print server, a driver is automatically installed
in silent mode from a computer on which a printer is registered as a network printer.
"Checking the Printer Drivers" (page
"Checking the Printer Name or the IP Address for the Printer (for
153).
"Registering a Network Printer (Network Path)" (page
148
4.14 Setting the Network Printers
150).
156). For