Selecting An E-Mail Target From The E-Mail Address Book - Fujitsu N7100 Operator's Manual

Table of Contents

Advertisement

5.4.1 Selecting an e-Mail Target from the e-Mail Address Book

The following explains how to use an e-mail address book to specify destinations when
sending an e-mail, instead of directly entering e-mail addresses with a keyboard.
The details to select e-mail addresses from an e-mail address book are described in
2
and
Step 3
 Type of the e-Mail Address Book
There are two types of e-mail address books, My List and LDAP List.
 My List
This is an e-mail address book that can be created by the user.
HINT
My List can also be edited using User Editor. For details, refer to
Using User Editor" (page
 LDAP List
This is an e-mail address book which uses all the data saved on the LDAP server.
The LDAP List cannot be edited.
The LDAP List cannot be used in the following cases, therefore the [LDAP List] tab
is not shown on the window.
 If an LDAP server is not used
 If logged in with the guest account
 If logged in with a local account
 e-Mail Targets that Can Be Selected from the e-Mail Address Book
When sending an e-mail, the following e-mail targets can be selected and entered from
the e-mail address book.
e-Mail Target
Group
Distribution List
e-Mail Address
Yes: Available —: Unavailable
(*): Not shown in the LDAP List
The following explains how to select an e-mail address using the LDAP List.
of
"5.4 Sending the Scanned Data by e-Mail" (page
433).
Icon Shown in the
e-Mail Address Book
5.4 Sending the Scanned Data by e-Mail
My List
233
230).
"Appendix F Editing
LDAP List
Yes
— (*)
Yes
— (*)
Yes
Yes
Step

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents