■ Changing the Display Size of Scanned Data
The scanned data shown for [Original] and [Current] on the [Assisted Scan] window can
be zoomed in and out or can be fitted in the preview window.
1. Press
■ Resetting a Processed Image
The processed image shown on the [Assisted Scan] window can be re-set to the original
image.
1. Press
to reset the processed image to the original image.
■ Undoing and Redoing a Process
An adjustment made to the scanned data shown on the [Assisted Scan] window can be
undone or redone.
1. Press
process.
■ Rotating Scanned Data
The scanned data shown on the [Assisted Scan] window can be rotated by 90 degrees.
1. Press
■ Changing the Image Mode of Scanned Data
When the image mode is [Automatic], the image mode of the scanned data shown on the
[Assisted Scan] window can be changed.
If this process is performed, the image returns to the original scanned data.
1. Press
5.11 Editing the Scanned Data in the Scan Viewer
to change the display size.
to change the scanned data to the previous state or redo a
to rotate the scanned data.
to change the image mode.
322