Fujitsu N7100 Operator's Manual page 254

Table of Contents

Advertisement

6. Press the [Scan] button.
When [Scan Viewer] is [Off], this will be a [Scan & Print] button.
 The scanning starts.
When [Scan Viewer] is [Off], the scan settings and scanning status (preview)
can be switched and shown during a scan.
When [Scan Viewer] is [On], the [Scan Viewer] window appears.
The maximum number of pages that can be scanned is 100.
When the blank page skip function is enabled, the number of scanned pages
excluding skipped blank pages is shown.
Additional pages can be scanned in place of skipped blank pages, until the
maximum number of scanned pages is reached.
 When the scanning has completed, the [Scan Viewer] window appears.
HINT
 If the [Scan & Send] button is pressed when [Scan Viewer] is [Off], the scanned data is
printed immediately after the scanning is complete, and the touch panel screen returns
to the [Main Menu]. For details, refer to
(page
313).
 On the scanner, printing rights for the printer server are checked before printing can be
performed. When printing rights are being checked, data may be spooled temporarily.
7. Check and edit the scanned data.
Scanned data can be checked on the [Scan Viewer] window. The scanned data can
be edited on the scan viewer details window which is displayed after a scanned
image is selected.
For more details, refer to
316).
8. On the [Scan Viewer] window, press the [Print] button.
 The scanned data is sent to the print server and printed.
The document name for the scanned data to be printed is the name of the
scanner.
ATTENTION
The user log shows the result of the process until the scanned data has been sent to the
print server. The network printer printing result is not included. For more details about
the user log, refer to
(User Log)" (page
HINT
If the printing fails, an error notification e-mail with the following title is sent from the
scanner to the e-mail address of the user that logged in with the LDAP server
authentication.
Network Scanner (XXXX) Error
"5.11 Editing the Scanned Data in the Scan Viewer" (page
"5.12.1 Viewing Details on Send Operations That Were Completed
326).
254
5.6 Printing the Scanned Data
"5.10 Enabling/Disabling the Scan Viewer"

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents