Replacing The Roller Set - Fujitsu N7100 Operator's Manual

6.5.3 Replacing the Roller Set

The Roller Set is made up of the brake roller and the pick roller.
The procedure for replacing each roller is as follows.
1. Turn off the scanner power and wait for at least 15 minutes.
For details, refer to
2. Unplug the power cable from the AC outlet.
3. Remove any documents from the ADF paper chute.
4. Pull the cover release catch toward you, place your hands at both sides
of the LCD cover, and open the LCD cover.
5. Replace the brake roller.
1. Open the cover of the brake roller.
Hold both ends of the cover of the brake roller, and open it in the direction of
the arrow.
"2.1 Turning the Power On/Off" (page
Be careful that the LCD cover does not shut on your fingers.
CAUTION
Hold both ends of the cover
354
6.5 Replacing Parts
51).
Cover