Cleaning The Exterior Of The Scanner; Cleaning The Scanner Body; Cleaning The Touch Panel - Fujitsu N7100 Operator's Manual

6.2

Cleaning the Exterior of the Scanner

■ Cleaning the Scanner Body

The scanner exterior (other than the touch panel), the ADF paper chute, and the stacker
must be cleaned using a dry cloth or a cloth slightly moistened with Cleaner F1 or a mild
detergent. Cleaning Wipes can also be used.
ATTENTION
 Do not use paint thinner or other organic solvents. The shape or color may be changed.
 Make sure that water does not get inside the scanner when cleaning.
 When a large amount of Cleaner F1 or a mild detergent is used, it may take some time until it
is dry. Use a small amount to moisten the cloths. Also, wipe off Cleaner F1 well from the part
with a dry cloth.

■ Cleaning the Touch Panel

To prevent the touch panel screen from becoming dirty, it should be regularly cleaned with
a soft, dry cloth.
Take care when cleaning the touch panel. It can be easily damaged, and should never be
scratched or banged with hard objects.
ATTENTION
Do not wipe the touch panel with a damp cloth.
Dust on the panel surface may become stuck between the panel and frame, causing the
touch panel to malfunction.

6.2 Cleaning the Exterior of the Scanner

Cloth
Cleaning Wipe
344
Cleaner F1 or
mild detergent
Paint thinner