Setting The Ftp Server Folders - Fujitsu N7100 Operator's Manual

4.13.2 Setting the FTP Server Folders

A list of FTP server folders may be set as [Save] targets for scanned data.
Up to a combined total of 100 FTP server folders and network folders can be added.
For details about setting network folders, refer to
(page 131).
For details about setting a file name for scanned data to be saved in an FTP server folder,
refer to "4.13.4 Setting a File Name Format for When Saving Scanned Data" (page
ATTENTION
Note the following when registering an FTP server folder:
 The FTP server folder is registered as a network path. If the FTP server folder is shared and
the length of the full path including the file name exceeds 259 characters, the saved data file
cannot be viewed. Before registering an FTP server folder, check that the length of the full
file path+name is not likely to exceed 259 characters.
 If the selected folder was created using a language foreign to that of the browsing operating
system, the FTP server folder may not register correctly.
The name of the FTP server folder is not displayed correctly because it contains
unrecognizable code.
 For FTP path, user name, and password, alphanumeric characters and symbols with the
exception of "\ / : ; * ? " < > | # & %" can be used.
4.13 Setting Folders for Saving Scanned Data
Touch
Panel
"4.13.1 Setting the Network Folders"
137
Central Admin
Console
145).