Setup Settings - Fujitsu FP-1000 User Manual

9-3. Setup Settings

Setting Groups
Settings Group
1
Memory Switch 1
2
Memory Switch 2
3 Print
4 Hardware
5 Interface
Setting Items and Detailed Setting Items
(Note) Setup items and the default values depend on the printer model and/or area.
(1) Memory Switch 1 Group
Item
1
Power On Status
2
Receive Buffer
3 Busy Condition
4 Receive Error
5 Auto LF
6 DSR(#6)Reset
7 INIT(#25)Reset
8 USB Soft Reset
Memory Switch 1 settings
Memory Switch 2 settings
Print settings
Hardware settings
Serial and USB interface settings
(This group is not displayed on printers with a LAN interface.)
Description
Specifies Power ON notification.
Specifies receiver buffer size.
Sets the printer as BUSY (data
reception not available).
Specifies what to do when a receive
error occurs using the serial interface.
Specifies whether the CR code
generates an automatic line feed.
Specifies whether receiving DSR
(#6) via the serial interface triggers a
hardware reset.
Specifies whether receiving INIT
(#25) via the serial interface triggers
a hardware reset.
Specifies whether a USB Soft Reset
triggers a hardware reset when using
printer class USB.
− 50/83 −
Description
Setting Value
Enable
1
Disable
2
1 45bytes
2 4Kbytes
1 Buffer full
2 Offline/Buffer full
1 ?Print
2 Ignore
1 Enable
2 Disable
1 Enable
2 Disable
1 Enable
2 Disable
1 Enable
2 Disable