Failure To Print On A Network Printer; Failure To Add A Network Folder - Fujitsu N7100 Operator's Manual

■ Failure to Print on a Network Printer

If printing on a network printer which has been set in the scanner is not possible, try the
following steps. Also, read the printer manual beforehand that provides information about
how to set printer settings and how to add a network printer.
Same as in "Failure to Connect to a Server Using Its IP Address"
■ Action
Check if a network connection is possible by trying the same solution for
Server Using Its IP Address"
Printer is not usable, due to an out of paper error, paper jam, or similar
problem.
■ Action
Check whether or not the printer is ready for printing, deal with the cause of the error, and try
again.
Not authorized to print on network printer.
■ Action
Contact the administrator to check if printing is allowed on the network printer.
Printing is impossible due to a printer or spooler error.
■ Action
Try the following:
 Check that printing is possible from the print server application.
 Check that the print server spooling is operating normally.

■ Failure to Add a Network Folder

If adding a network folder from the scanner is not possible, try the following steps.
Network folder shared name has been changed.
■ Action
Check the shared name on the server side.
The specified network folder path is invalid.
■ Action
Check that the specified network folder path is correct.
7.2 Network Connection Troubleshooting
(P.376).
380
(P.376).
"Failure to Connect to a