Contents Introduction ......................4 ■ Manuals .......................... 4 ■ About This Manual ......................4 ■ Warning Indications Used in This Document ..............5 ■ For Safe Use ........................5 ■ Precautions ........................7 ■ Disclaimer of Liability ...................... 7 ■ Regulatory Information ....................7 ■...
Introduction Accessing the Manuals Thank you for purchasing FUJITSU Image Scanner N7100E (hereinafter referred to as "the scanner"). The manuals can be accessed by downloading them This scanner is a network image scanner. This easy-to- from the scanner. operate scanner facilitates the optimal flow of office work For more details on how to download the Operator's for the workgroup communicating via the network.
■ Warning Indications Used in WARNING This Document Insert the power cable into the AC outlet within The following indications are used in this document to reach. In any one of the following situations, obviate any chance of accident or damage to you and/or immediately disconnect the power cable from the this product.
Page 6
Do not place or use the scanner in locations CAUTION which are subject to high temperature, humidity, poor ventilation, or dust. If placed in an area subject to high temperature, the cover may When installing the scanner on a table, make become overheated and deformed, resulting in sure that none of the scanner's parts extend over an electric leakage or fire.
■ Precautions Replacing Batteries In order to retain data such as BIOS information, this READ ALL OF THIS DOCUMENT AND THE product has a battery (CMOS RAM battery) on board. OPERATOR'S GUIDE CAREFULLY BEFORE USING THIS SCANNER. IF THIS SCANNER IS NOT USED ...
Für den Scanner wird folgendes bescheinigt: that the scanner is correctly connected or configured. If In Übereinsstimmung mit den Bestimmungen der the problem still persists, contact your FUJITSU scanner EN45014(CE) funkentstört dealer or an authorized FUJITSU scanner service Maschinenlärminformationsverordnung 3. GPSGV: Der höchste Schalldruckpegel beträgt 70 dB (A) oder...
This manual provides information about Steps 1 to 5 If anything is missing or damaged, contact your FUJITSU shown below. scanner dealer or an authorized FUJITSU scanner For information about Steps 6 to 9, refer to the manual service provider.
1.3 Part Names 1.4 Signs on the Scanner This section explains names of the scanner parts. This section describes the signs on the scanner. ■ Front view ■ Front Turns the power of the scanner on/off. ADF paper chute Note that this button is used to power off Extension the scanner only in an emergency.
Chapter 2 Setting up the Scanner 2.1 Removing the Protective 2.2 Connecting the Scanner Packaging Place the scanner at its installation site. The scanner comes with a protective foam sheet and Do not hold the ADF paper chute protective card attached. Follow the procedure described to lift up the scanner.
Chapter 3 Configuring Scanner Basic Settings Select the items to be specified in the scanner Do not move or shake the scanner basic settings. when it is turned on. CAUTION Select the target items to be configured on the This may damage components in the scanner and cause data to be [Installation Wizard] window, and press the [Start] lost.
Page 13
Set the scanner name. Set the date and time. On the [Scanner Name] window, specify the scanner On the [Date / Time] window, specify the date format name and workgroup or domain for joining the and the current date and time, and press the [Next] network, and press the [Next] button.
Page 14
Set the scanner's IP address. Set the Central Admin Server. On the [IP Address] window, set the scanner's IP On the [Scanner Central Admin Server] window, set address, and press the [Next] button. whether to enable the Central Admin Server and the Central Admin Server settings, and press the [Finish] button.
Page 15
HINT When the scanner name or domain name has been changed, the scanner is restarted. If you select [No] for [Show the Installation Wizard at next startup?], the [Installation Wizard] window does not appear immediately after the next scanner startup. This concludes the scanner basic settings procedure.
Chapter 4 Checking the Network Connection This section describes how to check the status of the Press the [Ping] button. network connection. A ping test is performed and the results are The network connection can be checked by using [Ping] displayed.
Chapter 5 Downloading the Manual For this scanner, the Operator's Guide (PDF), which contains information about scanner settings, administration, and operations, is provided in addition with this manual. Read it when using the scanner. Use Adobe Reader to view the Operator's Guide. Adobe Reader can be downloaded from the following site.
Appendix A Troubleshooting The network transmission mode may differ from the A.1 Network Connection connection target. On the [Network Advanced Settings] window, change [ Troubleshooting Link Speed/Duplex Mode from [Auto-Negotiation] to a fixed mode. This can be changed as follows: ■...
Check the DHCP server connection status and the "Ping request could not find host details of the server settings. xxxxxxxxx. Please check the name and The [Network Status] window can be displayed as try again." follows: 1. Select [Network Status] under [Check Network Status]. ■...
■ Failure to Connect to a Server ■ Failure to Access the Scanner Using Its Host Name or FQDN Using Internet Explorer, the Admin Tool, the Central Admin Server, or If the scanner cannot connect to a server by specifying its host name or FQDN, or if a server does not respond User Editor to a ping test by specifying its host name or FQDN, try...
Page 21
The URL of the target scanner is not A proxy server is being used. registered as a trusted site. ■ Action Set the proxy server not to be used. ■ Action Set the scanner URL as a trusted site for Internet 1.
After the password is changed, if the new password is lost or forgotten, login is not possible. If this happens, the same action that is taken when repairing the scanner is needed. Contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.