Table of Contents
Advertisement
Position Determination Fix Rate +WPDFR
Description:
This command specifies and returns the PD fix rate setting. This is used in Tracking
sessions only.
Note: The default for +WPDFR is zeros. The user must set the appropriate parameters prior
to starting a gpsOne session.
Values:
<num>
Number of fixes. The type <num> is a double word.
<time>
Time between fixes in milliseconds, limited to 1800 seconds.
Syntax:
Command syntax: AT+WPDFR=<num>,<time>
Command
AT+WPDFR?
Note: Request current setting type
AT+WPDFR=10,100
Note: maximum 10 fixes with 100
seconds in between fixes
Position Determination Privacy Level +WPDPL
Description:
This command specifies and returns the PD privacy setting (this is per PD session).
Values:
<level>
0: least privacy (no restriction)
1: medium
2: highest
Syntax:
Command syntax: AT+WPDPL=<level>
Command
AT+WPDPL?
Note: Request current setting type
AT+WPDPL=2
Note: Select highest level of security
Position Determination NV Privacy Level +WPPRV
Description:
This command specifies and returns the NV Privacy level for gpsOne. If the value is set to 0,
then MS will answer location requests. If the value is set to 1, then the mobile will only
answer to location requests in emergency mode. The new value is committed to NV.
Values:
<level>
0: Allow all
1: Emergency only
Syntax:
Command syntax: AT+WPPRV=<level>
Command
AT+WPPRV?
Note: Request current setting type
AT+WPPRV=1
Note: Phone will respond to emergency location requests only.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 13 – Position Determination (GPS) AT Commands
Possible responses
+WPDFR: 10,100
OK
OK
Possible Responses
+WPDPL: 0
OK
OK
Possible Responses
+WPPRV: 0
OK
OK
89
Advertisement
Table of Contents
