Current NAM Change +WNAM
Description:
This response indicates that the current NAM has changed.
Syntax:
Response Syntax: +WNAM: <nam>
Command
<nam>
1: NAM 1
2: NAM 2
3: NAM 3
4: NAM 4
Voice Mail Indicator +WVMI
Description:
This response indicates the status of the Voicemail Inbox.
Syntax:
Response syntax: +WVMI: <LineId>,<Num>
Command
SMS Message Storage Full +WMGF
Description:
This response indicates that the SMS Service Center has attempted to send an SMS
message but it was rejected because SMS Message Storage is Full. No new SMS
messages will be received until some room is created by deleting old messages from SMS
storage. Message deletion can be done using AT+CMGD.
Values:
<LineId>
1: Line 1
<Num>
The number of messages waiting in the inbox. Maximum value is 99.
0: No message waiting.
1: One message is waiting
3: Three messages are waiting
Example:
AT+CPHS?
+CPHS: 1,0
OK
AT+CPHS=3,1
+CME ERROR:
AT+CPHS=1,1
OK
AT+CPHS?
+CPHS: 1,1
OK
**** the message box contains 1 message *****
+WVMI: 1,1
AT+CPHS=2,1
OK
+WVMI: 1,1
AT+CPHS?
+CPHS: 1,1
OK
Syntax:
Response Syntax: +WMGF
Example Result
+WMGF
Note: Incoming message rejected. Message center notified with "out of resources" message.
Message center will attempt to re-send the message at a later time.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
+WNAM:2
Possible Responses
+WVMI: 1,2
OK
Note: 2 messages are in your voicemail box.
Interrogate the status of CPHS functionality
The voice mail indicator functionality is deactivated
Syntax error
3
Activate the voice mail indicator functionality
Interrogate the status of CPHS functionality
The voice mail indicator functionality is activated
A message is waiting on Line 1
Interrogate the status of voice mail indicator functionality
A message is waiting on LINE 1
Interrogate the status of CPHS functionality
The voice mail indicator functionality is activated
Chapter 3 – Unsolicited AT Result Codes
25