Cphs Command +Cphs; Change Default Player +Wcdp - Multitech CDMA Wireless Modem Reference Manual

CPHS Command +CPHS

Description: This command is used to activate, deactivate or interrogate a CPHS feature (e.g. Voice Mail
Indicator). When performing an interrogation (mode = 2), the selected <FctId> CPHS feature
is automatically enabled (status = 1).
Note: This command may answer +CME ERROR: 3 if the CPHS feature is disabled.
Values: <Mode>
0: Deactivate a CPHS feature
1: Activate a CPHS feature
2: Interrogate a CPHS status
<FctId>
1: Voice Mail Indicator
<Status>
0: CPHS feature disabled
1: CPHS feature enabled
Syntax: Command syntax: AT+CPHS=<Mode>,<FctId>
Command
AT+CPHS=<Mode>,<FctId>
AT+CPHS?
AT+CPHS=?
Note: display the range of values

Change Default Player +WCDP

Description: This command is used to select the default destination for the melody player.
Note: Selection of the player will have effect on the setting of the WCDM command.
Values: <player>
0: Speaker
1: Buzzer
Syntax: Command syntax: DP = <player>
Command
AT+WCDP=?
AT+WCDP=0
Select the speaker.
AT+WCDP?
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
OK
+CPHS: <Status>,<FctId1><CR<LF>
OK
+CPHS: (0-2),(1-1)
OK
Possible Responses
+WCDP : (0-1)
OK
OK
+WCDP: 0
OK
Chapter 14 – Specific AT Commands
104