New Message Indication +Cnmi - Multitech CDMA Wireless Modem Reference Manual

New Message Indication +CNMI

Description: This command selects the procedure for message reception from the network.
Values <mode>
The <mode> value controls the processing of unsolicited result codes. Only mode 2 is
supported at this time. The other mode values are accepted and return OK but the
processing of unsolicited result codes will be the same as with mode value 2.
0: Buffer unsolicited result codes in the TA. If the TA result code buffer is full,
1: Discard indication and reject new received message unsolicited result codes when
2: Buffer unsolicited result codes in the TA when TA-TE link is reserved and flush them
3:
<mt>
0: No SMS-DELIVER indications are routed.
1: SMS-DELIVERs are routed using unsolicited code: +CMTI: "MT", <index>
2: SMS-DELIVERs (except class 2 messages) are routed using unsolicited code:
<bm> sets the result code indication routing for received Cell Broadcast Messages. Default
0: No CBM indications are routed to the TE. The CBMs are stored.
1: The CBM is stored and an indication of the memory location is routed to the
2: New CBMs are routed directly to the TE using unsolicited result code (format
<ds>
0: No SMS-STATUS-REPORTs are routed.
1: SMS-STATUS-REPORTs are routed using unsolicited code: +CDS: <fo>, <mr>,
[<ra>] , [<tora>], <scts>, <dt>, <st> (Text mode)
2: SMS-STATUS-REPORTs are stored and routed using the unsolicited result ode:
<bfr>
0: TA buffer of unsolicited result codes defined within this command is flushed to the
1: TA buffer of unsolicited result codes defined within this command is cleared when
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
indications can be buffered in some other place or the oldest indications may be
discarded and replaced with the new received indications
TA-TE link is reserved. Otherwise forward them directly to the TE
to the TE after reservation. Otherwise forward them directly to the TE
Forward unsolicited result codes directly to the TE. TA-TE link specific in band used
to embed result codes and data when TA is in on-line data mode
sets the result code indication routing for SMS-DELIVERs. Default is 2.
+CMT: <oa>, <scts>, <tooa>, <lang>, <encod>,
<priority>[,<cbn>],<length><CR><LF><data> (text mode)
is 2.
customer application using unsolicited result code: +CBMI: "BC", <index>
matches that of +CBM: <oa>, [<alpha>,] <scts> [,<tooa>, <length>]
<CR><LF><data> (text mode)
sets the routing for SMS-STATUS-REPORTs. Default is 1.
+CDSI: "SR", <index>
Default is 0.
TE when <mode> 1...3 is entered (OK response shall be given before flushing the
codes)
<mode> 1...3 is entered.
Chapter 8 – Short Messages Commands
58