Iota Error +Woae; Preparing Data Services +Woap; Please Retry +Woar; Display Pri Checksum +Wsum - Multitech CDMA Wireless Modem Reference Manual

IOTA Error +WOAE

Description: This response indicates that an IOTA failure has occurred. Refer to Sprint® document SEBU
3G NAI dual launch v131 sec 1.2 for additional details.
Syntax: Response Syntax: +WOAE: "IOTA error 1012"
Command

Preparing Data Services +WOAP

Description: This response indicates that IOTA provisioning is in progress.
Syntax: Response Syntax: +WOAP: "Preparing Data Services"
Command

Please Retry +WOAR

Description: This response indicates that the previous attempt to start a data session should be retried.
When a data session is started without a valid profile, IOTA provisioning is initiated. Upon
completion of profile provisioning, this response is displayed.
Syntax: Response Syntax: +WOAR: "Please Retry"
Command

Display PRI Checksum +WSUM

Description: This command is used to display the PRI checksum value. This checksum value is
calculated and programmed into the modem at the time of manufacture. The checksum
value is not updated or changed if a user modification is made to any of the PRI settings.
Syntax: Command syntax: +WSUM?
Command
AT+WSUM?
Note: Display checksum
value.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
+WOAE: "IOTA error 1012"
Possible Responses
+WOAP: "Preparing Data Services"
Possible Responses
+WOAR: "Please Retry"
Possible Responses
+WSUM: 0004DDCF
OK
Note: The displayed value is a eight digit hexadecimal number.
Chapter 23 - Sprint® Specific AT Commands
194