C
19 - Q
HAPTER
CDMA O
PERATION
This section contains AT commands that are specified and developed by Qualcomm.
Note: Mobile IP related AT commands work only on the modems that supported the MIP features.
Transition to Diagnostics Monitor $QCDMG
Description:
This command returns "OK" and then transitions the phone serial port to DM mode. DM
mode runs at 38.4 Kbps and uses a proprietary half-duplex protocol.
Syntax:
Command syntax: AT$QCDMG
Command
AT$QCDMG
Note: Transition to DM port
Quick Net Connect $QCQNC
Description:
This command is used to enable or disable the Quick Net Connect (QNC) feature.
Values:
<Val>
0: Disable QNC capability. This means that packet Originations will use the Packet Data
Service Option number.
1: Enable QNC capability. This means that Packet Originations will use the Async Data
Service Option number.
Syntax:
Command syntax: AT$QCQNC=<Val>
Command
AT$QCQNC?
Note: Display the current setting
AT$QCQNC=?
Note: Display the range of values
AT$QCQNC=1
Note: Enable QNC compatibility
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
D
UALCOMM
Possible Responses
OK
Note: Command is valid
AT C
EFINED
Possible Responses
$QCQNC: 0
OK
Note: Command is valid
$QCQNC: (0-1)
OK
Note: Command is valid
OK
Note: Command is valid
OMMANDS FOR
150