Return Profile Information $Qcmipgetp; Set Nai For Active Profile $Qcmipnai - Multitech CDMA Wireless Modem Reference Manual

Return Profile Information $QCMIPGETP

Description: This command is used to return all information corresponding to the specified profile
number.
Values: <Val>
(0-5): Profile #
Note: If no profile number is entered, all information corresponding to the currently active
profile is returned. If there is no profile associated with the specified number, an error is
returned.
Syntax: Command syntax: AT$QCMIPGETP=<Val>
Command
AT$QCMIPGETP?
Note: Display the current setting
AT$QCMIPGETP=?
Note: Display the range of values
AT$ CMIPGETP=0
Note: Set value to 0

Set NAI for Active Profile $QCMIPNAI

Description: This command is used to set the network access identifier (NAI) for the currently active
profile.
Values: <String> The network access identifier text to be stored.
<Val>
0: Do not commit to NV
1: Commit to NV
Note 1: Double quotes are only required if the string contains a command.
Note 2: If the value provisioned is not committed to NV, the temporary value will be deleted
at the end of the following call if $QCMIPP is called.
Syntax: Command syntax: AT$QCMIPNAI=<String>,<Val>
Command
AT$QCMIPNAI?
Note: Display the current setting
AT$QCMIPNAI=?
Note: Display the range of accepted
character values.
AT$QCMIPNAI=myName@myDom
ain.com,0
Note: Non-committed value set
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Possible Responses
ERROR
Note: Command is not valid
$QCMIPGETP: (0-5)
OK
Note: Command is valid
Profile:0 Enabled
.....
OK
Note: Command is valid
Possible Responses
User1@myprovider.com,1
OK
Note: Command is valid
$QCMIPNAI: (20,21,23-7E),(0-1)
OK
Note: ASCII hexadecimal character range supported by
this command. (All non-control codes.)
OK
Note: NAI is now:
myName@MyDomain.com
160