Set Imsi +Wimi; Sid And Nid +Wsid - Multitech CDMA Wireless Modem Reference Manual

Set IMSI +WIMI

Description: This command is used to set the IMSI. Valid IMSI is 15 digits in length. For support of
Wireless Number Portability, changes to the IMSI will NOT update the MDN. Changes to the
IMSI will automatically update the Access Overload Class values unless specifically modified
using +WAOC command.
Syntax: Command syntax: AT+WIMI=<number>
Command
AT+WIMI?
Note: Get current IMSI
AT+WIMI=310008585551212
Note: Set IMSI to 310008585551212

SID and NID +WSID

Description: This command is used to set the home SID and NID for 800Mhz CDMA operation only. The
new SID/NID values are committed to NV with the +WCMT command.
Values: <index>
The location in the SID/NID list to store the values. A maximum of 20 entries (0-19) are
supported.
<SID number>
SID value range – 0 to 32767.
<NID number>
NID value range – 0 to 65535.
Syntax: Command syntax: AT+ WSID=<index>,<SID number>,<NID number>
Command
AT+WSID?
Note: Get current SID and NID
AT+WSID=3, 4145, 2102
AT+WSID?
Note: Set SID to 4145 and NID to 2102.
Store in location 3 of the SID/NID list.
AT+WSID=2
AT+WSID?
Note: Set SID to 0 and NID to 0. Store in
location 2 of the SID/NID list.
AT+WSID=4, 64
AT+WSID?
Note: Set SID to 64 and NID to 0. Store
in location 4 of the SID/NID list.
AT+WSID=, 64, 1024
AT+WSID?
Note: Set SID to 64 and NID to 1024.
Store in the currently selected location of
the SID/NID list.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 16 – Provisioning AT Commands
Possible Responses
+WIMI: 310008581111111
OK
OK
Possible Responses
+WSID: 1, 45, 84
OK
Note: The SID/NID pair 45,84 in location 1 is
selected.
OK
+WSID: 3, 4145, 2102
OK
Note: The SID/NID pair 4145,2102 in location 3 is
selected.
OK
+WSID: 2, 0, 0
OK
Note: The SID/NID pair 0,0 in location 2 is selected.
OK
+WSID: 4, 64, 0
OK
Note: The SID/NID pair 64,0 in location 4 is
selected.
OK
+WSID: 4, 64, 1024
OK
Note: The SID/NID pair 64,1024 in location 4 is
selected.
125