Call Originated +Worg; Call Privacy Indication +Wprv - Multitech CDMA Wireless Modem Reference Manual

Syntax: Command syntax: AT+WIND=<IndLevel>
Command
AT+WIND?
Note: Show current setting.
AT+WIND=?
Note: Show <IndLevel> range.
AT+WIND=128
Note: Turn on Network lost indication only.

Call Originated +WORG

Description: This response indicates that an attempt to establish a voice call has occurred.
Syntax: Response Syntax: +WORG: <number>
Command
ATD1800555121
2;
Note: <number> is the dialing string sent to the base station. You may see extra numbers before the
intended dialing string, this is a result of pre-pended numbers or other call options such as +CLIR.

Call Privacy Indication +WPRV

Description: This response confirms that the call privacy level has changed during a call.
Syntax: Response Syntax: +WPRV: <prv>
Command
AT+WPRV=1
<prv>
0: Indicates normal privacy
1: Indicates enhanced privacy
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
OK
+WORG:18005551212
+WCNT:3
OK
Possible Responses
OK
+WPRV: 1
Chapter 3 – Unsolicited AT Result Codes
Possible Responses
WIND: 8
OK
Note: Default 8. (9 if RUIM is present)
+WIND: (0-2047)
OK
OK
Note: Command accepted.
23