Table of Contents
Advertisement
Phonebook
Syntax:
Command syntax: ATD><index>[;]
ATD>[<mem>]<name>[;]
ATD>[<mem>]<index>[;]
Command
AT+CPBS?
Note: Which phonebook is selected.
ATD>5;
Note: Dial location #5 from ME
phonebook.
ATD>SM202;
Note: Dial location 202 from the
SM(RUIM card) phonebook.
ATD>"Bill";
Note: This command is NOT valid for
MC, RC, and LD phonebooks as they
are supported in CDMA networks
Note: When the FD facility is enabled, only the numbers in the FDN phonebook can be
called. For example, if "014629" is present in the FD phonebook, the command ATD014629;
will be successful. Data calls are not allowed when the FD facility is enabled.
Hang-Up Command H
Description:
The ATH (or ATH0) command is used by the application to disconnect the remote user. In
the case of multiple calls, all calls are released (active, on-hold and waiting calls).
The specific ATH1 command has been appended to disconnect the current outgoing call,
only in dialing or alerting state (i.e. ATH1 can be used only after the ATD command, and
before its terminal response (OK, NO CARRIER, ...). It can be useful in the case of multiple
calls.
Syntax:
Command syntax: ATH
Command
ATH
Note: Ask for disconnection
ATH1
Note: Ask for outgoing call
disconnection
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Possible Responses
+CPBS: ME,11,100
OK
Note: Command executed
OK
Note: Command executed
+WORG:5551212
Note: Voice call origination sent to Base Station with dialing
string "5551212".
+WEND: 3
Note: Call Attempt failed/ended. Reason 3, signal faded.
See Chapter 14, Unsolicited Commands.
OK
Note: Command executed
+WORG:5551212
Note: Voice call origination sent to Base Station with dialing
string "5551212".
+WEND: 3
Note: Call Attempt failed/ended. Reason 3, signal faded.
See Chapter 14 on Unsolicited commands.
OK
Note: Command executed
+WORG:5551212
Possible Responses
OK
+WEND: 10
Note: Every call, if any, is released
ERROR
+WEND: 10
Note: Outgoing call, if any, is released
Chapter 5 – Call Control Commands
35
Advertisement
Table of Contents
