Reset Min And Mdn To Factory Defaults +Wrmm - Multitech CDMA Wireless Modem Reference Manual

Reset MIN and MDN to factory defaults +WRMM

Description: This command is used to reset MIN and MDN to their factory default values. The service
programming code must be successfully entered using the +WSPC command prior to using
the +WRMM command. The modem must be manually reset or power cycled following the
use of the +WRMM command.
Syntax: Command syntax: +WRMM
Command
AT+WRMM
Note: Reset MIN and MDN to factory defaults.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 23 - Sprint® Specific AT Commands
Possible Responses
OK
Note: Command successful.
195