Iwf Device Identification +Cgoi; U Packet Data Inactivity Timer +Cta - Multitech CDMA Wireless Modem Reference Manual

IWF Device Identification +CGOI

Description: This command causes the IWF to transmit one or more lines of information text, determined
by the manufacturer, which is intended to permit the user of the IWF to identify the device,
based on the ISO system for registering unique object identifiers. Typically, the text will
consist of a single line containing numeric strings delimited by period
Syntax: Command syntax: AT+CGOI
Command
AT+CGOI
Note: Display the current settings.
AT+CGOI=0
Note: Set the value to 0.
U Packet Data Inactivity Timer +CTA
m
Description: This command is used to Set, Read, and Test the Um packet data inactivity timer.
Values: <val>
0: Traffic Channel not released during inactivity periods.
20-255: Release the Traffic Channel after <value> 1-second intervals have elapsed
since last sending or receiving RLP data frames on the Um interface.
Syntax: Command syntax: AT+CTA=<val>
Command
AT+CTA ?
Note: Display the current setting.
AT+CTA=?
Note: Display valid parameter range.
AT+CTA=1 Note: Set to one second.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 17 – Extended AT Commands in IS707.3
Possible Responses
OK
Note: Command is valid.
ERROR
Note: Command is not valid.
Possible Responses
+CTA: 0
OK
Note: Command is valid
+CTA: (0-255)
OK
Note: Command is valid
OK
Note: Command is valid
characters.
147