Ringer Sound Level +Crsl; Subscriber Number +Cnum; Select Type Of Address +Csta - Multitech CDMA Wireless Modem Reference Manual

Ringer Sound Level +CRSL

Description: This command is used to set/get the sound level of the ringer on incoming calls.
Values: <sound level>
0: Min volume (muted)
1: Default volume
4: Max volume
Syntax: Command syntax: AT+CRSL=<sound Level>
Command
AT+CRSL=0
Note: Set volume to Min (muted).
AT+CRSL=4
Note: Set volume to Max.
AT+CRSL?
Note: Get current ringer sound level
AT+CRSL=4
Note: Supported parameters

Subscriber Number +CNUM

Description: This command is used to return the subscriber MSISDN. If the subscriber has different
MSISDNs for different services, each MSISDN is returned on a separate line.
Values: <alphax>
<numberx>
<typex>
Syntax: Command syntax: AT+CNUM
Response syntax: +CNUM: <alpha1>, <number1>, <type1>, <CR><LF>+CNUM: <alpha2>,
<number2>, <type2> ...
Command
AT+CNUM
Note: Get MSISDN
AT+CNUM=?

Select Type of Address +CSTA

Description: This command is used to select the type of phone address to use.
Values: <typex>
Syntax: Command syntax: AT+CSTA=<typex>
Command
AT+CSTA?
Note: Get type of address
AT+CSTA=?
Note: Get supported address types
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
optional alphanumeric string associated with <numberx>
string type phone number with format as specified by <typex>
type of address byte in integer format – only supports 129
Possible Responses
+CNUM :"Phone","8585551212",129
Note: MSISDNs
+CNUM:
OK
type of address byte in integer format – only supports 129
Possible Responses
OK
Note: Current ring playing is muted.
OK
Note: Current ring playing with Max. volume.
CRSL:4
OK
Note: Current level is 4
CRSL: (0-4)
OK
Possible Responses
+CSTA: 129
Note: Local Number format
+CSTA: (129-129)
OK
Chapter 4 – General Commands
32