Packet Dial String +Wpds; Primary Cdma Channels +Wpcc; Secondary Cdma Channels +Wscc - Multitech CDMA Wireless Modem Reference Manual

Packet Dial String +WPDS

Description: This command is used to set the packet dial string.
Values: <string>
A string of length 0 to 16 characters.
Syntax: Command syntax: AT+WPDS=<string>
Command
AT+WPDS?
Note: Get current Packet Dial String
AT+WPDS="#999"
Note: Set the Packet Dial String to #999

Primary CDMA Channels +WPCC

Description: This command is used to set the primary CDMA channels for 800Mhz CDMA operation only.
Values entered must be valid CDMA 800Mhz Channel numbers.
Values: <channel a number>
Value range: 0 – 2047
<channel b number>
Value range: 0 – 2047
Syntax: Command syntax: AT+WPCC=<channel a number>,<channel b number>
Command
AT+WPCC?
Note: Get current primary CDMA channels
AT+WPCC=211,432
Note: Set the primary CDMA channels

Secondary CDMA Channels +WSCC

Description: This command is used to set the secondary CDMA channels for 800Mhz CDMA operation
only. Values entered must be valid CDMA 800Mhz Channel numbers.
Values: <channel a number>
Value range: 0 – 2047
<channel b number>
Value range: 0 – 2047
Syntax: Command syntax: AT+WSCC=<channel a number>,<channel b number>
Command
AT+WSCC?
Note: Get current secondary CDMA channels
AT+WPCC=511,632
Note: Set the secondary CDMA channels
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 16 – Provisioning AT Commands
Possible Responses
+WPDS: "#777"
OK
Note: Current Packet Dial String is #777
OK
Possible Responses
+WPCC: 283,384
OK
OK
Possible responses
+WPCC: 691,777
OK
OK
127