Reset Rlp 3 Protocol Statistics $Qcrl3R; Scrm'ing Selection $Qcscrm; R-Sch Selection $Qctrtl - Multitech CDMA Wireless Modem Reference Manual

Reset RLP 3 Protocol Statistics $QCRL3R

Description: This command is used to reset the RLP 3 protocol statistics.
Syntax: Command syntax: AT$QCRL3R
Command
AT$QCRL3R?
Note: Display the current setting
AT$QCRL3R
Note: Reset TCP statistics counter

SCRM'ing Selection $QCSCRM

Description: This command is used to enable or disable the mobile from SCRM'ing.
Values: <Val>
0 : Mobile never SCRMs.
1 : Mobile can SCRM as needed.
Note: Command only applies to SO 33 calls. This value is stored in NV. The default is 1.
Syntax: Command syntax: AT$QCSCRM= <Val>
Command
AT$QCSCRM?
Note: Display the current setting
AT$QCSCRM =?
Note: Display the range of values
AT$QCSCRM =0
Note: Set value to 0

R-SCH Selection $QCTRTL

Description: This command is used to enable or disable mobile R-SCH throttling.
Values: <Val>
0: Mobile never throttles R-SCH
1: Mobile can throttle R-SCH as needed.
Note: Command only applies to SO 33 calls. This value is stored in NV. The default is 1. For
MSM500, MSM5105, and MSM5100 ASICs only.
Syntax: Command syntax: AT$QCTRTL=<Val>
Command
AT$QCTRTL?
Note: Display the current setting
AT$QCTRTL =?
Note: Display the range of values
AT$QCTRTL =0
Note: Set value to 0
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Possible Responses
ERROR
Note: Command is not valid
$QCRL3R:
OK
Note: Command is valid
Possible Responses
$QCSCRM: 1
OK
Note: Command is valid
$QCSCRM: (0-1)
OK
Note: Command is valid
OK
Note: Command is valid
Possible Responses
$QCTRTL: 1
OK
Note: Command is valid
$QCTRTL: (0-1)
OK
Note: Command is valid
OK
Note: Command is valid
157