Table of Contents
Advertisement
Request Product Serial Number Identification +GSN
Description:
The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the individual alphanumeric string.
Syntax:
Command syntax: AT+GSN
Command
AT+GSN?
Note: Display the current setting.
AT+GSN
Note: Display the serial number.
Request Global Object Identification +GOI
Description:
The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the device, based on the ISO system for registering unique object identifiers.
Syntax:
Command syntax: AT+GOI
Command
AT+GOI?
Note: Display the current setting.
AT+GOI
Note: Display the responses to the
command
Note: Currently, no information text is provided.
Modulation Selection +MS
Description:
The extended-format compound parameter is used to control the manner of operation of the
modulation capabilities in the DCE.
Values:
manufacturer specific
<automode>
0: Disabled
1: enabled with V.8 or V.32bis Annex where applicable
<min_rate> & <min_rx_rate>
set to 0 if unspecified
<max_rate> & <max_rx_rate>
set to 0 if unspecified
Syntax:
Command syntax:
AT+MS=[<carrier>[,<automode>[,<min_rate>[,<max_rate>[,<min_rx_rate>
[,<max_rx_rate>]]]]]]
Command
AT+MS?
Note: Display the parameter information.
AT+MS=?
Note: Display the range of parameters
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
<carrier>
Chapter 17 – Extended AT Commands in IS707.3
Possible Responses
ERROR
Note: Command is not valid
+GSN: F607A117
OK
Note: Command is valid
Possible Responses
ERROR
Note: Command is not valid
+GOI:
OK
Note: Command is valid
Possible Responses
+MS: V32B,1,1200,14400
Note: Command is valid
+MS: (V21,V22),(0,1,),(0,300-14400),(0,300-14400)
Note: Command is valid
137
Advertisement
Table of Contents
