Extended Roam Indication +WRMW
Description:
This command is used to suppress output of non-standard Extended Roam Indicators (64
through 127) that are displayed by the +WROM unsolicited response. This setting is written
to NV and is persistent across resets.
Note: This command is not available in Sprint®. and Verizon®. software versions.
Values:
<value>
0: Suppress output of ERI indicators 64 through 127.
1: Enable output of ERI indicators 64 through 127.
Syntax:
Command syntax: AT+WRMW=<value>
Command
AT+WRMW=?
AT+WRMW?
Note: Display current setting.
AT+WRMW=1
Note: Enable output of ERI 64 through 127.
AT+WRMW?
Note: Display current setting.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 6 – Network Service Commands
Possible Responses
+WRMW: (0-1)
OK
+WRMW: 0
OK
Note: ERI 64 through 127 suppressed.
OK
+WRMW: 1
OK
Note: ERI 64 through 127 displayed.
50