Cellular Result Codes +Crc; Dte-Dce Local Rate Reporting +Ilrr - Multitech CDMA Wireless Modem Reference Manual

Cellular Result Codes +CRC

Description: This command gives more detailed ring information for an incoming call. Instead of the
string "RING", an extended string is used to indicate which type of call is ringing (e.g.
+CRING:VOICE).
These extended indications are:
+CRING:VOICE
+CRING:DATA
+CRING:FAX
+CRING:OTAPA
+CRING:TEST
+CRING:UNKNOWN
Syntax: Command syntax: AT+CRC
Command
AT+CRC=0
Note: Extended reports disabled
AT+CRC=1
Note: Extended reports enabled

DTE-DCE Local Rate Reporting +ILRR

Description: This parameter controls whether or not the extended-format "+ILRR:<rate>" information text
is transmitted from the DCE to the DTE. Currently the product only supports 0 = OFF.
Values: <value>
Decimal number corresponding to the selected option. Currently, only 0 is supported
(disables reporting of local port rate).
Syntax: Command syntax: AT+ILRR=<value>
Command
AT+ILRR=0
Note: Local port
rate report
disabled
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
for normal voice calls
for all types of data calls
for all types of fax calls
for OTAPA calls
for markov, loopback, and test calls
for unknown/undefined calls types
Possible Responses
OK
Note: Command valid
OK
Note: Command valid
Possible Responses
OK
Note: Command valid
Chapter 10 – Data Commands
73