Excess Spc Failures +Wlck; Position Determination Lock Level +Wplck - Multitech CDMA Wireless Modem Reference Manual

Excess SPC Failures +WLCK

Description: This response indicates that 15 failed attempts have been made to enter the service
programming code. If the modem is not in emergency mode, any active call will be
terminated and the modem will go into offline mode.
Note: A successfully entered service programming code grants access to modem
configuration data.
Syntax: Response Syntax: +WLCK: "Excess SPC failures!"
Command
AT+WSPC=0,123456
Note: 15

Position Determination Lock Level +WPLCK

Description: This command specifies and returns the position determination lock setting. If the lock is set
to 'lock all', then only E911-related position determination events are allowed and all other
position determination requests are denied.
Values: <level>
0: No lock (allow all)
1: Lock mobile initiated location services
2: Lock mobile terminated location services
3: Lock all
Syntax: Command syntax: AT+WPLCK=<level>
Command
AT+WPLCK=?
Note: Display valid parameter range
AT+WPLCK?
Note: Request current setting type
AT+WPLCK=3
Note: Select lock all
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
attempt to enter the SPC.
th
Chapter 22 - Verizon® Specific AT Commands
Possible Responses
+WLCK: "Excess SPC failures!"
Note: Modem now in offline mode.
Possible Responses
+WPLCK: (0-3)
OK
+WPLCK: 0
OK
OK
Note: Command successful
186