Set Reverse Tunneling $Qcmiprt; Set Mn-Aaa Shared Secrets $Qcmipmass - Multitech CDMA Wireless Modem Reference Manual

Set Reverse Tunneling $QCMIPRT

Description: This command is used to set the reverse tunneling currently active profile.
Values: <Val1>
0: Do not request reverse tunneling
1: Request reverse tunneling
<Val2>
0: Do not commit to NV
1: Commit to NV
Note: If the value provisioned is not committed to NV, the temporary value will be deleted at
the end of the following call if $QCMIPP is called.
Syntax: Command syntax: AT$QCMIPRT=<Val1>, <Val2>
Command
AT$QCMIPRT?
Note: Display the current setting
AT$QCMIPRT=?
Note: Display the range of values
AT$QCMIPRT=1,1
Note: Set value to 1 and commit

Set MN-AAA Shared Secrets $QCMIPMASS

Description: This command is used to set MN-AAA shared secrets for the currently active profile.
Values: <String> The shared secret text to be stored.
<Val>
0: Do not commit to NV
1: Commit to NV
Note 1: Double quotes are only required if the string contains a command.
Note 2: If the value provisioned is not committed to NV, the temporary value will be deleted
at the end of the following call if $QCMIPP is called.
Syntax: Command syntax: AT$QCMIPMASS =<String>,<Val>
Command
AT$QCMIPMASS?
Note: Display the current setting
AT$QCMIPMASS=?
Note: Display the range of accepted
character values.
AT$QCMIPMASS= my5ecretC0de,0
Note: Non-committed value set
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 19 – Qualcomm Defined AT Commands for CDMA Operation
Possible Responses
$QCMIPRT: 1,1
OK
Note: Command is valid
$QCMIPRT: (0-1), (0-1)
OK
Note: Command is valid
OK
Note: Command is valid
Possible Responses
$QCMIPMASS: Set
OK
Note: Command is valid
$QCMIPMASS: (20,21,23-7E),(0-1)
OK
Note: ASCII hexadecimal character range supported by this
command. (All non-control codes.)
OK
Note: MN-AAA is now: my5ecretC0de
161