Table of Contents
Advertisement
Request Manufacture Identification +GMI
Description:
The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the manufacturer.
Syntax:
Command syntax: AT+GMI
Command
AT+GMI?
Note: Display the current setting.
AT+GMI
Note: Display the manufacturer
Request Manufacture Identification +GMM
Description:
The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the specific model of device.
Syntax:
Command syntax: AT+GMM
Command
AT+GMM?
Note: Display the current setting.
AT+GMM
Note: Display the model
Request Revision Identification +GMR
Description:
The command is used to cause the DCE to transmit one or more lines of information text,
determined by the manufacturer, which is intended to permit the user of the DCE to identify
the version, revision level or date, or other pertinent information of the device.
Note: When there is no stored PRL, the value displayed for the PRL ID will be 0.
Syntax:
Command syntax: AT+GMR
Command
AT+GMR?
Note: Display the current setting.
AT+GMR
Note: Display the revision
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 17 – Extended AT Commands in IS707.3
Possible Responses
ERROR
Note: Command is not valid
+GMI: MODEM
OK
Note: Command is valid
Possible Responses
ERROR
Note: Command is not valid
+GMM: Model 72
OK
Note: Command is valid
Possible Responses
ERROR
Note: Command is not valid
+GMR: S/W VER: WISMOQ WQ1.8, 10015
OK
Note: Command is valid
136
Advertisement
Table of Contents
