Request Prl Version Information +Wprl; Minute Alert +Wmbp - Multitech CDMA Wireless Modem Reference Manual

Request PRL Version Information +WPRL

Description: This command requests PRL Version information for the currently selected NAM.
Syntax: Command syntax: AT+WPRL?
Command
AT+WPRL?
Note: Request current NAM's PRL version
AT+WPRL?
Note: Request current NAM's PRL version
Note: The range for PRL is a 16-bit type.

Minute Alert +WMBP

Description: This command is used to set the minute alert while in a voice conversation.
Values: <mode>
0: Disable alert
1: Enable alert
<interval>
1 – 30: Time in minutes
Syntax: Command syntax: AT+WMBP=<mode>,<interval>
Command
AT+WMBP=0
Note: Turn off the alert
AT+WMBP=1,4
Note: Turn on the alert and set 4 minutes apart
AT+WMBP?
Note: Request current setting
AT+WMBP=?
Note: Display valid parameter ranges.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 14 – Specific AT Commands
Possible Responses
+WPRL: 1024
OK
+CME ERROR: 41
Note: PRL request invalid because there's no PRL loaded.
Possible Responses
OK
OK
+WMBP: 1,4
Note: PRL request invalid because there's no PRL
loaded.
+WMBP: (0-1),(1-30)
108