Set Phone Functionality +Cfun - Multitech CDMA Wireless Modem Reference Manual

Set Phone Functionality +CFUN

Description: This command selects the mobile station's level of functionality. AT+CFUN=0 is equivalent
to AT+CPOF
The AT+CFUN=1 (by default, AT+CFUN will act the same as AT+CFUN=1) command
restarts the entire CDMA stack and CDMA functionality: a complete software reset is
performed. In addition, the OK response will be sent at the last baud rate defined by the
+IPR command.
Values: <functionality level>
0: Set the phone to OFFLINE mode.
1: Set the phone to ONLINE mode and resets the stet.
Syntax: Command syntax: AT+CFUN=<functionality level>
Command
AT+CFUN?
Note: Ask for current functionality level
AT+CFUN=0
Note: Set phone offline
AT+CFUN=1
Note: Set phone ONLINE. A software reset is performed.
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 4 – General Commands
Possible Responses
+CFUN: 1
OK
Note: Full functionality
OK
Note: Command valid
OK
Note: Command valid
29