Table of Contents
Advertisement
Position Determination Operating Mode +WPDOM
Description:
This command sets and returns the PD session operating mode.
Values:
<mode>
0: Standalone only (currently not available)
1: Network only
2: Speed optimal (minimize time-to-fix, MS-based first, PDE-based later if failed)
3: Accuracy optimal (PDE preferred, MS in case of failure)
4: Data optimal– minimize data exchanged
5: MS-based only
Syntax:
Command syntax: AT+WPDOM=<mode>
Command
AT+WPDOM?
Note: Request current setting mode
AT+WPDOM=1
AT+WPDOM=0
Position Determination Data Download +WPDDD
Description:
This command specifies and returns the PD data download setting.
Note: The default for +WPDDD is zeros. User must set the appropriate parameters prior to
starting a gpsOne session.
Values:
<type>
0: single-shot download of data valid for the specified duration periodically download
data for the specified duration
<duration>
Specified in terms of minutes; type is declared as a word.
Note: The download duration is not currently used in the gpsOne software.
Syntax:
Command syntax: AT+WPDDD=<type>,<duration>
Command
AT+WPDDD?
Note: Request current setting type
AT+WPDDD=0,10
Note: single-shot data valid for 10 minutes
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 13 – Position Determination (GPS) AT Commands
Possible Responses
+WPDOM: 5
OK
OK
+CME ERROR: tbd (PD parameter not supported)
Possible Responses
+WPDDD: 0,10
OK
OK
88
Advertisement
Table of Contents
