Custom Character Set +Wccs - Multitech CDMA Wireless Modem Reference Manual

Custom Character Set +WCCS

Description: This command provides the ability to edit and display the custom character set tables. The
"CUSTOM" mode of the +CSCS command uses the custom character set tables.. In this
mode, when the user enters a string, this string is translated into the CDMA character set
using the 'Custom To CDMA' table. In a similar way, when the user requests a string display,
the string is translated from CDMA character set using the 'CDMA To Custom' table.
In edit mode, the edit session is terminated by <ctrl-Z> (0x1A), or aborted by <ESC> (0x1B).
Only hexadecimal characters ('0'...'9', 'A'...'F') can be used; two hexadecimal digits per
character. The number of characters entered must equal the edit range requested, otherwise
the command will terminate with a "+CME ERROR: 3" result.
Values: <mode>
0: Display the table
1: Edit the table
<table>
0: Custom To CDMA conversion table
1: CDMA To Custom conversion table
<char 1>, <char 2> Character range to display/edit. If only <char 1> is present, only this
char is displayed/edited.
0...127: for CDMA To Custom conversion table
0...127: for Custom To CDMA conversion table
Syntax: Command syntax: AT+WCCS=<mode>,<table>,<char 1>[,<char 2>]
Command
AT+WCCS=0,0,20,30
Note: Display character locations 120 through 130
of the Custom To CDMA conversion table
AT+WCCS=1,0,115<CR>
20<ctrl-Z>
Note: Edit character 115 of the Custom To CDMA
conversion table
AT+WCCS=1,1,0,4<CR>
40A324A5E8<ctrl-Z>
Note: Edit the 5 first characters of the CDMA To
Custom conversion table
AT+WCCS=1,1,200
Note: Edit character 200 of CDMA To Custom
conversion table
Multi-Tech Systems, Inc. CDMA Wireless AT Commands - PN S000294C
Chapter 14 – Specific AT Commands
Possible Responses
+WCCS: 11, 78797A2020202020097E05
OK
Note: 11 characters displayed
OK
Note: Edit successful
OK
Note: Edit successful
+CME ERROR: 3
Note: Index out of range
103